Products & Capabilities

Our company services many different industries, both local and international. Our capabilities are only limited to the plans that you provide. For more information on what we can do for you, please choose a category that is closest to what you would like for us to create for you.

 

What is roll forming?

The process of bending a continuous strip of metal through a series of shaped rolls. The process gradually forms metal into a pre-determined shape. The nature of forming metal by this process allows for very tight tolerances to be met and maintained.

 

What is stamping?

Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining[1]. This could be a single stage operation where every stroke of the press produce the desired form on the sheet metal part, or could occur through a series of stages. The process is usually carried out on sheet metal.

 

What is progressive stamping?

Progressive stamping is a metalworking method that can encompass punching, coining, bending and several other ways of modifying metal raw material, combined with an automatic feeding system.


The feeding system pushes a strip of metal (as it unrolls from a coil) through all of the stations of a progressive stamping die. Each station performs one or more operations until a finished part is made. The final station is a cutoff operation, which separates the finished part from the carrying web. The carrying web, along with metal that is punched away in previous operations, is treated as scrap metal.


The progressive stamping die is placed into a reciprocating stamping press. As the press moves up, the top die moves with it, which allows the material to feed. When the press moves down, the die closes and performs the stamping operation. With each stroke of the press, a completed part is removed from the die.

What is bending?

 

Bending is a process by which metal can be deformed by plastically deforming the material and changing its shape. The material is stressed beyond the yield strength but below the ultimate tensile strength. The surface area of the material does not change much. Bending usually refers to deformation about one axis.


Bending is a flexible process by which many different shapes can be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend.

 

 

Roll Forming Capabilities

Michigan

Mexico

 • 23 Complete Roll Forming Lines

 • Spindle Sizes 1.5" – 2.5"

 • Passes from 6-24

 • Horizontal Decoilers

 • Pre-Notching, Mid-Notching & Post Notching/Forming

 • Compound Sweeps, Twists & Natural Sweeps

 • Widths from 0.785"- 14"

 • Material gauge 2.5mm

 • 7 Complete Roll Forming Lines

 • Spindle Sizes 1.5" – 3"

 • Passes from 8-22

 • Horizontal Decoilers

 • Pre-Notching, Mid-Notching & Post Notching/Forming

 • Compound Sweeps, Twists & Natural Sweeps

 • Widths from 0.785"- 16"

 • Material gauge 6.0mm

 

Stamping Capabilities

Michigan

Mexico

 • 5 press lines 90 Tons – 300 Tons

 • Blanking/punch presses 35 Tons – 85 Tons

 • Coil widths up to 36 inches

 • 5 press lines 130 Ton – 1000 Tons

 • Blanking/punch presses 10 Tons – 75 Tons

 • Coil widths up to 60 inches

Phone: 810.387.3224    |    Fax: 810.387.3820    |    sales@redall.com

Copyright 1990-2013 Redall Industries, Inc.